Krüger & Matz KM0397, Руководство пользователя, Страница: 21 / 54

21
Owner’s manual
EN
PAIRING
1. Press and hold the MFB for about 1 second, the headset will turn on and
automatically enter the Bluetooth paring mode (red and blue LED flash
alternately).
2. Please keep the headset and an external device close to each other while
pairing.
3. Enable the Bluetooth function on your external device and search for the
headset (KM0397).
4. Connect with the headset.
5. Successful pairing is signified by a voice prompt (when the devices are
paired, blue LED flashes once every 10 seconds).
Notes:
• Not all external devices support function of voice guidance.
• If pairing is not completed within 3 minutes, the headset will automatically
quit pairing mode and after another 2 minutes turn off. In that case press
and hold the MFB again to turn on the device and repeat pairing process
according to the instructions above.
• Every time the headset is switched on, it will connect to last connected device
automatically. Please note, your device must be on with Bluetooth function
turned on.