2
2
3
4
3
4
1
3
4
Take down the track and remove the track sockets from
the wall.
Be sure to note which numbered socket goes on which
side! Set screws are likely to be in unique positions from
socket to socket.
Fill the drilled holes in the wall with silicone for moisture
protection.
Reinstall the sockets aligning them with the final position
marks. Confirm that the track sockets are again straight
and tighten the mounting screws.
Ensure each socket is vertical.
Remove labels from sockets.
13.
T I G H T E N T R A C K S O C K E T S
2
1
3
4
5
Reposition the rear track into the tightened track sockets.
Slide the previously inserted hex nuts over the holes nearest the
opening of each socket. Adjust position of track as needed.
Install a button head screw into the hex nut at each end.
Install a button head screw into the remaining threaded on the
bottom of each track socket.
Torque all 4 button head screws to 110 in-lbs (9.5 ft-lbs).
14.
R E I N S TA L L R E A R T R A C K
2
