Kronos 300, Руководство пользователя

Страница: 54 / 75

- 50 -
transmission equipment and the transmitting and receiving
antennas of radio communication equipment, the shade of trees, and
the sides of waters, all of which will produce different degrees of
impact on the GPS signal reception and emission of radio signals.
1) The receiver is set to the base station with external radio mode;
2) Set up tripods, the tripod on which to put the radio antenna
should be placed at a higher point, the least distance between the two
tripods should be 3metres.
3) fix the tribrach and the base station receiver, (if set at a known
point, a strict levelling should be done), power on the base station
receiver.
4) Install the radio transmitting antenna, hang the radio on the tripod,
place the storage battery at the bottom of the radio station.
5) Connect the radio, mainframe and battery with the multi-function
cable, which is a "Y"-shaped cable used to connect the base station
mainframe (5-pin red jack), transmitting radio (black jack) and
external battery (red and black clip).Playing the role of power supply
and data-transmission.
Important:
Please check the red dot on the five-pin port when you use the