3
Connections:
It is
very important
that the antenna in connected in the following
exact order:
1.
Connect the GPS antenna
2.
Connect the COAX antenna cable from the LNB roof unit
3.
Connect the RJ45 cable from the roof unit
4.
Connect 12 volt, -0 volt directly at the 12 volt battery of the
caravan or camper
5.
Connect the ignition signal cable or side light (brown =
ig12V)
a.
Make sure there is a ground cable mounted from minus
from the battery to the chassis on the caravan or camper
6.
DO NOT connect the receiver / decoder to the control box yet
7.
Take the caravan or camper outside in an open area and press
the ON button on the satellite box control panel
8.
Let the antenna find the satellite DO NOT press the SAT
button for changing satellite
9.
After the antenna have found the satellite, and stay open and
locked onto the satellite, you can press the SAT button and
change satellite
10.
Connect the COAX cable from the receiver/decoder with the
receiver/decoder OFF
11.
Now, switch ON the receiver/decoder
In case there are no battery in the caravan or camper, the antenna
can be connected to a 12 volt power supply of minimum 5A capacity,
but the power supply can ONLY supply power to the antenna, not to
any other usage.
The mini USB connector is only to be used for software update by the
dealer.
