manualshive.com logo in svg

Krone Swadro 1000, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Swadro 1000 Скачать руководство пользователя страница 9

Introduction

9

Pos : 8. 10.1 /Übersc hrift en/Übersc hrift en 2/ A-E/Besti mmungsgemäß er G ebrauch (alt) @ 0\ mod_1196401545090_78. doc x @ 7728 @ 2 @ 1

3.5

Intended Use

Pos : 8. 10.2 /BA/ Einl eit ung/ Besti mmungsgemäßer Gebrauc h/ Sc hwader /Besti mmungsgemäß er G ebr auch Sc hwader @ 1\ mod_1202215704310_78. doc x @ 57818 @ @ 1

The rotary rake is built exclusively for conventionaluse in agricultural work (intended use).

Pos : 8. 10.3 /BA/ Einl eit ung/ Besti mmungsgemäßer Gebrauc hNic ht besti mmungs gemäss (2012-03-19 16: 41: 15) @ 0\mod_1196401324340_78. doc x @ 7690 @ @ 1

Any use of the machine for other purposes is deemed not to be in accordance with intended
use. The manufacturer shall not be liable for any resulting damage; the user alone shall bear
the risk.

Operation in accordance with intended use also includes observing the operating, maintenance
and service instructions specified by the manufacturer.

Unauthorised modifications to the machine may affect the properties of the machine or disrupt
proper operation. For this reason, unauthorised modifications shall exclude any liability of the
manufacturer for consequential damage.

Pos : 8. 11 /BA/ Einl eit ung/T ec hnis che D at en/Technisc he Daten @ 0\ mod_1195566374865_78. doc x @ 594 @ 2 @ 1

3.6

Technical data

All information, illustrations and technical data in these operating instructions correspond to the
latest state at the time of publication. We reserve the right to make design changes at any time
and without notification of reasons.

Pos : 8. 12 /Übersc hrift en/Übersc hrift en 2/F-J/F ahr en und Trans port @ 90\ mod_1322817603262_78. doc x @ 766460 @ 2 @ 1

3.7

Driving and Transport

Pos : 8. 13 /BA/ Sicher heit /Fahren und Trans port /Fahren und Transport @ 90\ mod_1322814208969_78. doc x @ 766433 @ @ 1

For machines which have an operating permit, follow the conditions contained therein!

The Road Traffic Law varies from one state or country to another.

If there are differences between manufacturer data and the Road Traffic Law, the current
requirements of the relevant state or country always apply.

Speed limits as specified by the Road Traffic Law must be followed. Speed limits differ from one
state or country to another.

For machines which have no brakes, the pulling tractor's empty weight must correspond to the
permitted operating specifications, but in any case twice the axle load of the machine
(depending on the user's country)

Pos : 9 / BA/---------------Seitenumbr uch---------------- @ 0\ mod_1196175311226_0.doc x @ 4165 @ @ 1

Содержание Swadro 1000















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды