Operation
57
Pos : 27.14 / BA/Bedienung / Sc hwader/Zinken / Zinkenar me/Zi nkenarme i n die Ar beit sst ellung sc hwenken @ 2\ mod_1202711544751_78.doc x @ 59954 @ @ 1
3
2
1
2
1
SW9070017
Figure 31
•
Pull out the linch pin (1).
•
Remove the bolts (2).
•
Swivel tine arms (3) to working position: the rotor must be turned so that the tine arms do
not collide with the protection when swivelling.
•
Insert the bolts (2) and secure with the linch pin (1).
Note
Always insert bolts (2) from above when the tine arms are in front of the rotors (tines touch the
ground).
Take care that the linch pin (1) is always properly engaged (the ring of the linch pin must be
inserted in the groove of the shaft).
Note
Swivel the right collapsible tine arm on the machine side in sequence from behind forwards and
the left collapsible tine arm on the machine side in sequence from the front backwards to the
working position.
Pos : 27.15 / BA/Ei nst ellungen/ Sc hwader/Zinkenar me/Hinweis durch di e Vors pannkraft 20 kg H andkraft auf bringen @ 39\ mod_1268744530150_78.doc x @ 361222 @ @ 1
Note
When swivelling the tine arms into working position, a manual force of 20 kg has to be applied
by the use of preload force (via assembled disc springs) in order to be able to insert the bolt (2)
(see chapter Settings “Disc springs at collapsible tine arms).
Pos : 27.16 / BA/---------------Seitenumbr uc h---------------- @ 0\ mod_1196175311226_0.doc x @ 4165 @ @ 1
