Krone MX 310 GD, Оригинальная инструкция по эксплуатации

Страница: 191 / 244

Maintenance
191
Pos : 31.16.4 /Ü berschriften/Ü berschriften 3/P-T/Rei fen prüfen und pfl egen @ 0\mod_1197358037214_78.doc @ 18094
13.14.1 Checking and maintaining tyres
Pos : 31.16.5 /BA/Wartung/Reifen/R eihenfolg e Rei fenmontage @ 0\mod_1199954083131_78.doc @ 37321
KLWOA-02
1
3
5
7
9
2
4
6
8
10
Figure 122
When loosening and tightening the wheel nuts, observe the order indicated in the illustration. 10
operating hours after they have been mounted, check the wheel nuts and retighten them if
necessary. After that, check them every 50 operating hours to make certain they are tight.
Check the tyre pressure at regular intervals and refill if necessary. The tyre pressure depends
on the size of the tyres. The values are listed in the table.
Pos : 31.16.6 /BA/Wartung/Reifen/Anzi ehdr ehmoment @ 0\mod_1199955905460_78.doc @ 37340
Tightening Torque
Threading Key size in
mm
Number of bolts
per hub -
pieces
Max. tightening torque
black galvan.
M12 x 1.5 19 4/5 95 Nm 95 Nm
M14 x 1.5 22 5 125 Nm 125 Nm
M18 x 1.5 24 6 290 Nm 320 Nm
M20 x 1.5 27 8 380 Nm 420 Nm
M20 x 1,5 30 8 380 Nm 420 Nm
M22 x 1.5 32 8/10 510 Nm 560 Nm
M22 x 2 32 10 460 Nm 505 Nm
Pos : 31.16.7 /BA/-----Seitenumbruc h------ @ 0\mod_1196175311226_0.doc @ 4165