manualshive.com logo in svg

Krone BOX LINER TU 70, Руководство по эксплуатации

Поделиться
Скачать
Krone BOX LINER TU 70 Скачать руководство пользователя страница 70

MAINTENANCE AND REPAIR

70

Operating instructions • Box Liner • 515108039-02 • 11/2018

9.2.1 

Genset

Servicing the system can be dangerous
due to moving parts, hot coolant, and elec-
trical components. Only trained and quali-
fied maintenance personnel may install, re-
pair, or service the system. Ensure that the
power is off and that the negative battery
terminal has been disconnected before
work is performed on the unit. 

 ○

Fuel containers pose an explosive, fire
and cracking hazard, even if the fuel
has emptied.

 ○

Watch out for rotating and hot (ex-
haust) parts.

 ○

Do not use fuel to clean the air filter.

 ○

Do not clean with high-pressure.

 ○

Do not allow soap and water to enter
the generator.

Also observe the enclosed supplier

documentation.

9.2.2 

Regular checks and functional
testing

To ensure that the trailer is in proper oper-
ating condition, the safety-related equip-
ment must be checked regularly for proper
function, its effectiveness must be ensured
and the recurring inspections must be per-
formed.

► Prior to starting each trip, perform a

departure check 

(see "7.4 Commissioning

before each trip", pg. 63)

.

► Perform legally prescribed general in-

spections punctually.

► Observe the intervals and instructions

for testing and maintenance of the
supplied components (e.g. axles) con-
tained within the respective supplied
operating instructions.

► Report any detected safety defects:

 ○

Take the trailer out of operation if oper-
ational safety is not ensured.

 ○

When there is a change of shift, inform
the colleague starting the next shift
about observed defects and implemen-
ted measures.

► Perform the following checks and func-

tional testing at the intervals pre-
scribed:

Component

Inspection

Daily, or before every journey

Kingpin/coupling plate Visual check for wear,

damage and proper
attachment.

Rear underrun pro-
tection/side collision
protection

Visual check for wear,
damage and proper
attachment.

Compressed air tank

Actuate the water
drain valve 

(see "5.5

Draining the com-
pressed air tanks",
pg. 28)

.

Lighting equipment

Visually inspect for
correct operation

Weekly

Compressed air tank

 ○

Perform a visual
inspection for
wear and dam-
age.

Tyres

 ○

Check the tread
depth and tyre
pressure (9 bar)

Kingpin/coupling plate Lubricate with high-

pressure grease

► Go to an authorised specialist work-

shop if defects have been found.

Содержание BOX LINER TU 70





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды