manualshive.com logo in svg

Krone BOX LINER TU 70, Руководство по эксплуатации

Поделиться
Скачать
Krone BOX LINER TU 70 Скачать руководство пользователя страница 28

RUNNING GEAR OPERATION

28

Operating instructions • Box Liner • 515108039-02 • 11/2018

Disconnecting C-coupling heads

þ

The parking brake on the tractor unit is
applied.

þ

The parking brake on the trailer is ap-
plied 

(see "5.6.2 Parking brake", pg. 31)

.

► Always disconnect the supply com-

pressed air coupling first.

► Disconnect the brake compressed air

coupling.

► Disconnect the power supply (vehicle

lighting) and the brake power supply
(EBS).

ü

The supply and control connections
are disconnected.

5.5 

Draining the compressed air
tanks

!

 WARNING

Risk of accident due to condensation
water!

Condensation water in the compressed air
tank can cause corrosion and affect the
functionality of the brake system and the
air suspension. Frozen condensation wa-
ter can lead to total failure of the brake
system and to serious accidents.

► Check the compressed air tank for the

presence of condensation water.

► Drain any existing condensation wa-

ter.

► Drain existing condensation water

more frequently in case of low or
strongly fluctuating outside temperat-
ures.

The tractor vehicles are fitted with air dry-
ers. This means that condensate in the
compressed air is largely prevented. Dur-
ing cold periods of the year, or when air
humidity is high, condensation water can
still form and collect in the compressed air
tank. The compressed air supply for the
brake system and the air suspension is
stored in the compressed air tanks. Exist-
ing condensation water can be drained us-
ing the water drain valve.

2

1

Fig. 5-10:

Compressed air tank

1

Compressed air tank

2

Water drain valve

► Push the valve pins of the water drain

valves on all compressed air tanks to
the side until the condensation water is
fully drained.

ü

The condensation water is drained.

Содержание BOX LINER TU 70





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды