Krone 1 000 245, Оригинальная инструкция по эксплуатации, Страница: 60 / 108

Operation
60
9.6 Travelling speed und drive speed
The travelling speed and drive speed
while swathing depend on:
• forage quantity
• ground
• degree of dryness
Use these as rough guidelines:
• PTO speed approx. 450 rpm
• Travelling speed approx. 8 - 10 km/h
Drive speed and travel speed must be
adapted to each individual operation.
Note
The travelling speed is based on the work image (orderly rake work with good formation of
swaths).
9.7 Swathing
CAUTION!
Property damage due to collision between tractor and guards for rotors
When cornering while using the machine for work, the machine may be damaged.
• Choose the minimum curve radius so that the tractor does not touch the guards for rotors.
• Ensure there is no one in the working range of the machine.
• Raise lower links by approx. 100 mm (the height from lower link pinions to ground is
approx. 630 mm).
• Raise outrigger arms into headland position.
• Switch on universal shaft at low engine speed.
• Increase speed slowly to approx. 450 rpm.
• Lower outrigger arms into working position.
• Move single-action control unit to position (“Lower / float position”) to ensure the soil
adaption of the chassis when using the machine for work.
• Select travelling speed so that the crop is picked up cleanly and completely.
• Readjust working height, if necessary.