45
44
Mounting the crossbar
The crossbar is part of the safety design seat unit, and together with the harness prevents the
child falling out. Do as stated below:
Insert the crossbar into the two attachment points on the seat unit. Check that the
crossbar is correctly attached by pulling it gently upwards.
Figure A
.
Using the crossbar
The crossbar can be lifted in order to make it easier when lifting a child out of the seat unit. Do
as stated below:
Unfasten one side of the crossbar and pull it upwards.
Figure A
.
1
1
A
A
Mounting the hood on the seat unit
Do as stated below:
Open up the hood.
Attach the fittings in the seat unit as shown in
Figure A
.
If the fittings are in different positions during the mounting, it is possible to attach one of
them first and then adjust the placing until it has the same position as the second fitting.
Then attach the second fitting.
Back support
The seat unit has a back support that can be set at stepless increments, for the comfort of the
child. Do as stated below:
Lower the back support by snapping the press-button fitting together and pulling it
downwards.
Figure A
.
Raise the back support by pulling the nylon tape upwards.
Figure B
.
1
1
2
2
3
A
Содержание City
Страница 1: ...HANDBOK MANUAL KRONANCity kronanCity ...
Страница 4: ...5 4 Översiktsillustration Sittdel ...
Страница 18: ...33 32 Overview Seatunit ...
Страница 30: ......
