kromo gr300 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 22

kromo gr300 Скачать руководство пользователя страница 9

EN

page 32

INSTALLER SECTION

4. MACHINE PROGRAMMING

The following is necessary to access programming

:

•

simultaneously press keys “A” and “B”, making sure to press key “B” just a little before,
for about 5 seconds after which the message “Key” shall be displayed;

•

set the password parameter at “15” using keys “

⇑

” “

⇓

”;

•

confirm the password by pressing key “A”; if the password is correct parameter access is

granted, if it is incorrect the message “Key Err” shall be displayed for about 4 seconds

.

Note: to enter programming the machine must not be washing; if you try to enter program-
ming during washing, the message (no Pr) will be displayed and the dishwasher will continue
the cycle.

The machine will automatically exit programming if no key is pressed for about 20 seconds.

Note: to reset the display, turn off the general wall switch for 10 seconds, and then
turn the main wall switch on again.

4.1 Parameter selection

Once parameter selection is accessed the message “Pr” shall be displa A” repeatedly to

define the parameter “P” number (P1, P2, … P20).

It is now possible to:

•

modify the parameter value with the “

⇑

” “

⇓

” keys

;

•

confirm the value or proceed to subsequent parameter programming by pressing key

“A”;

•

return to parameter selection without modifying data by pressing key “B”.

4.2 Parameter programming

Once parameter programming is accessed the message “P” shall be displayed as well as
the blinking parameter number followed by the parameter value.
It is now possible to:

•

modify the parameter value with the “

⇑

” “

⇓

” keys;

•

confirm the value or proceed to subsequent parameter programming by pressing key

“A”;

•

return to parameter selection without modifying data by pressing key “B”.

The following parameters can be modified (see table):

«
...
7
8
9
10
11
...
»

Содержание gr300























Отзывы:

Нет отзывов