KROMA
TELECOM
PROFESSIONAL
MONITORS BM5414/20
BM5414/20
19
5. Option: GEOMETRY SET UP
By means of this menu could be modified the parameters in relation to the
format of the picture, and another with more technical content. The menu
through the one will be able to carry out the change is the following:
GEOMETRY SET UP
HEIGHT N 4:3
WIDTH N 4:3
HEIGHT U/S 4:3
WIDTH U/S 4:3
TRAPEZIUM
HEIGHT N 16:9
WIDTH N 16:9
HEIGHT U/S 16:9 WIDTH U/S 16:9
V. LINEARITY
CORNER
V- S ADJ
H-COMPENSATION
E-W PARAB
H-PHASE
V-SHIFT
H-SHIFT
V-COMPENSATION BEAM LIMIT
Figure 9
In order to modify a parameter, this will be selected, with aid of the ORE, and
we pressing CAL key,then will appear in the lower line of the menu: the
name and the value of the parameter, at the moment it is updated in the
monitor. In the same way that in the previous menu, the operation of both
keys CAL and ESC are the same.
This option, provides access to the adjustment of all the variables involved
with the geometry alignment of the monitor.
Option: CAL WITH ACTIVE DATA
With this option you will convert all the current values of the parameters, in
calibration values,this option is very appropriate after carrying out an
adjustment and before of saving the data in one of the user memories.
During the process of calibration will appear in the 2
nd
line of the menu,
MANUAL SET UP MENU the message: "UPDATING."
