background image

© 2012 Elster GmbH

Safety

Translation from the German

Operating and installation instructions

10.2.1.4 Edition 01.12 GB

Liability

We will not be held liable for damages resulting from non-observance 
of the instructions and non-compliant use.

Safety instructions

Information that is relevant for safety is indicated in the instructions 
as follows:

 DANGER

Indicates potentially fatal situations.

 WARNING

Indicates possible danger to life and limb.

 CAUTION

Indicates possible material damage.

All work and settings in the “Expert” chapters may only be carried 
out by a qualified technician. Electrical interventions may only be 
carried out by a qualified electrician. The heating system must be 
disconnected from the power supply before any electrical work is 
carried out on the unit.

Conversion

All technical changes are prohibited. 

Transport

On receipt of the product, check that the delivery is complete. Report 
any transport damage immediately. 

Storage

Store the product in a dry place. Ambient temperature: see Techni-
cal data.

Please read and keep in a safe place

 Please read through these instructions carefully before 

installing or operating. Following the installation, pass the instruc-
tions on to the operator. 
These instructions can also be found at www.docuthek.com.

Explanation of symbols

 • 

,  1 ,  2 ,   

...  = Action

 

= Instruction

Safety

Lago FB OT digital remote control

Содержание Lago FB OT

























Отзывы: