5
SERVICE
26
OPTIWAVE X500
www.krohne.com
06/2017 - 4005809801 - AD ATEX OPTIWAVE x500 R01 en
5.4 Manufacturer
If the serial number on the device nameplate starts with the letter "F", this device is made by:
KROHNE S.A.S.
2 Allée des Ors
–
B.P. 98
26103 Romans-sur-Isère CEDEX
France
If the serial number on the device nameplate starts with the letter "S", this device is made by:
KROHNE Measurement Technology (Shanghai) Co., Ltd.
Minshen Road 555 Songjiang Industrial Zone
Shanghai 201612
China
If you need to return your device for inspection or repair, make sure that you send it to the
correct manufacturer and obey the instructions that follow.
5.5 Returning the device to the manufacturer
5.5.1 General information
This device has been carefully manufactured and tested. If installed and operated in accordance
with these operating instructions, it will rarely present any problems.
WARNING!
Should you nevertheless need to return a device for inspection or repair, please pay strict
attention to the following points:
•
Due to statutory regulations on environmental protection and safeguarding the health and
safety of the personnel, the manufacturer may only handle, test and repair returned devices
that have been in contact with products without risk to personnel and environment.
•
This means that the manufacturer can only service this device if it is accompanied by the
following certificate (see next section) confirming that the device is safe to handle.
WARNING!
If the device has been operated with toxic, caustic, radioactive, flammable or water-endangering
products, you are kindly requested:
•
to check and ensure, if necessary by rinsing or neutralising, that all cavities are free from
such dangerous substances,
•
to enclose a certificate with the device confirming that it is safe to handle and stating the
product used.
