manualshive.com logo in svg

KROHNE OPTISYS TSS 050 Series, Руководство пользователя, Страница: 11 / 32

Поделиться
Скачать
KROHNE OPTISYS TSS 050 Series Скачать руководство пользователя страница 11

 INSTALLATION 

3

11

OPTISYS TSS X050 SERIES

www.krohne.com

07/2018 - 4004781502 - MA OPTISYS TSSx050 R02 en

3.1  General notes on installation

3.2  Storage and transport

•

Store the device in a dry, dust-free location.

•

Avoid continuous direct sunlight.

•

The original packing is designed to protect the equipment. It has to be used if the device is 
transported or sent back to the manufacturer.

3.3  Pre-installation requirements

Installation position

As a matter of principle, the device can be operated in any position. However, for installations in 
vertical pipes, the direction of flow should be from bottom to top. Moreover please observe the 
good legibility of the indicator and good accessibility and operability.

Measuring window

The measuring windows must be oriented in such a way that no air bubbles or particles may be 
caught between them. The measuring windows must be kept clean. This can be achieved by an 
appropriate CIP / SIP cleaning process or you can alternatively use the type for a retractable 
assembly.

Make sure before installation that:

•

there is enough working space for operating the device.

•

the process is shut down.

•

tanks or pipelines are depressurised, empty and clean.

•

connection nozzle and process connection of the device are matching.

INFORMATION!

Inspect the packaging carefully for damages or signs of rough handling. Report damage to the 
carrier and to the local office of the manufacturer.

INFORMATION!

Do a check of the packing list to make sure that you have all the elements given in the order.

INFORMATION!

Look at the device nameplate to ensure that the device is delivered according to your order. 
Check for the correct supply voltage printed on the nameplate.

CAUTION!

•

If the temperature drops below the dew point, the device may be influenced or damaged by 
condensation in the housing.

•

At stress with change of temperatures, e.g. a cold water jet on the hot device could lead to 
leakages into the device. 

•

At applications with dew point, temperature shock or thermal shock stresses it is 
recommended to put the desiccant pouch into the housing.

Содержание OPTISYS TSS 050 Series

































Отзывы:

Нет отзывов