INSTALLATION
2
9
OPTISONIC 8300
www.krohne.com
03/2020 - 4008065101 - QS OPTISONIC 8300 R01 en
2.7 General requirements
2.7.1 Vibration
INFORMATION!
The following precautions must be taken to ensure a reliable installation.
á
Make sure that there is adequate space on the sides.
á
Protect the signal converter from direct sunlight and install a sunshade if necessary.
á
Signal converters installed in control cabinets require adequate cooling, e.g. by fan or heat
exchanger.
á
Do not expose the signal converter to intense vibrations and mechanical shocks.
Figure 2-7: Prevent intense vibrations
INFORMATION!
In case of too many vibrations, please install supports on both sides of the flowmeter to minimize
movement.
2.6 Pre-installation requirements
Make sure that you have all necessary tools available:
á
Allen key (4 and 5 mm)
á
Small screwdriver
á
Wrench for cable glands and for pipe mounting bracket (remote version only); refer to
Mounting the field housing, remote version
on page 14
INFORMATION!
To assure a quick, safe and uncomplicated installation, we kindly request you to make provisions
as stated below.
