Starting tolerance check
Adjusting tolerance range
Finishing tolerance check
Zero point adjustment
Changing sign (-/+) / digit
Next digit
Confirming
Exit SETUP menu
Switching mm/inch (UNIT)
Error Report:
ERR 01 – Unknown Input (Input is not supported)
ERR 02 – Unknown Input (Input is not supported)
ERR 06 – Tolerance limit is out of the acceptable range
ERR 07 – OFFSET is out of the acceptable range
The instrument must be returned to the service center for checking
ERR 08 – Reference point in „Relative – Mode“ is out of the indicating range
ERR 09 – no communication with computer or peripheral devices
ERR 10 – Interruption of communication during data transfer
