33
Important:
The measuring axis
must be in vertical
position to the
measuring
surface!
Determination of the
minimum measuring value
via pivoting
the gage (optimal measurement)
Measured value
Measured value
Measured value
too high
correct
too high
Important:
The measuring axis must
be in vertical position to
the measuring surface
!
Determination of the
maximum measuring value
for measurement of
narrow grooves via lateral displacement of the gage, where the gage
cannot be pivoted vertically.
Measured value
Measured value
Measured value
too small
correct
too small
For checking round parts it is advisable to use measuring gages with
chisel contacts (
Technical Data).
Important:
The fixed flat contact
must be square against
the part to be measured!
Hold gage steady around
2s!
Measurement of flat material (e.g. foam material) with flat measuring
contacts.
Take note of the measuring force!
The movable flat contact aligns optimally so a pivoting or moving of the
gage is not necessary.
Program: MIN / MAX / HOLD
Movable flat
contact
Fixed flat
contact
