11
EN
1. Connect the charging base to a suitable power
supply. The green light on the charging base will
turn on.
2. Manually dock the MissionNANO
TM
into the
charging base while the MissionNANO
TM
is
powered off.
3. The green light on the charging base will turn to
red. MissionNANO
TM
will begin to charge.
1. Gently turn your MissionNANO
TM
upside down.
2. Remove the screws on the battery cover.
Remove the battery cover.
MissionNANO
TM
can be charged manually without
the boundary wire.
If you need to replace the battery, follow these
steps:
Your MissionNANO
TM
will live longer and healthier if it is allowed to hibernate. So even though it is tough, we
recommend storing your MissionNANO
TM
in your shed or garage during the winter.
Before you prepare your MissionNANO
TM
for winter hibernation, we recommend you:
• Thoroughly clean your MissionNANO
TM
• Fully charge the battery
• Turn the power off
To maximize the battery life, fully charge the battery before storage during winter.
WARNING: Protect the underside of MissionNANO
TM
from water. NEVER store MissionNANO
TM
upside down outdoors.
The boundary wire can be left in the ground although its ends should be protected, such as placed in a tin can
with grease. If the charging base is left outside for the winter, leave the boundary wire connected.
NOTE:
When bringing the MissionNANO
TM
back to work after winter hibernation, make sure the charging strips
and contact pins are clean. We recommend using a fine grade emery cloth to clean the contacts. Using the
app, make sure the date and time are correct and send MissionNANO
TM
back to what it loves doing: mowing.
Winter Hibernation
4
WARNING: Power off before attempting any adjustment, replacement or repair.Before
replacing the blades, turn your MissionNANO
TM
OFF and put on protective gloves.
Replacing the battery
5
