KRESS KUY02P, Оригинальное руководство пользователя

Страница: 6 / 60

6
EN
COMPONENT LIST
1. KEYLESS CHUCK
2. AUXILIARY HANDLE
3. HAMMER DRILL /DRILL SELECTOR DIAL
4. LOCK-ON BUTTON
5. ON/OFF SWITCH
6.
FORWARD AND REVERSE ROTATION
CONTROL
Not all the accessories illustrated or described
are included in standard delivery.
TECHNICAL DATA
Type designation KUY02P (Y02P-designation of
machinery, representative of Impact Drill)
Voltage 230-240V~50Hz
Rated input power 650W
Rated no load speed 0~3000/min
Impact rate 0-45000bpm
Chuck capacity 13mm
Max drilling
capacity
Steel 13mm
Concrete 13mm
Wood 25mm
Machine weight
1.69kg
Protection class
/ll
ACCESSORIES
Auxiliary Handle 1
Depth Gauge 1
We recommend that you purchase your accessories
listed in the above list from the same store that sold
you the tool. Refer to the accessory packaging for
further details. Store personnel can assist you and offer
advice.
NOISE INFORMATION
A weighted sound pressure L
pA
=90dB(A)
A weighted sound power L
wA
=101dB(A)
K
PA
& K
WA
5dB(A)
Wear ear protection.
VIBRATION
INFORMATION
Vibration total values (triax vector sum) determined
according to EN 62841:
Drilling into
metal
Vibration emission value
a
h,D=
2.87 m/s²
Impact drilling
into concrete
Vibration emission value
a
h,ID
= 5.98m/s²
Uncertainty K = 1.5m/s²
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a preliminary
assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used especially what kind of
workpiece is processed dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration and noise accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration and noise exposure
risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions
and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.