KRESS KUE11, Инструкция по безопасности и эксплуатации

Страница: 14 / 16

14
Lithium-Ion brushless circular saw
KUE11 KUE11.9
TROUBLE SHOOTING
Symptom Possible Causes Possible Solution
Tool will not start when
operating the on/off trigger.
Battery pack not plugged in.
Battery pack powered off.
Check to make sure battery pack is connected
well into a working outlet.
Charging the battery.
Cutting depth is less than
that is set.
Sawdust accumulated at the rear
of the base.
Shake out sawdust. Consider connecting a
vacuum for dust collection.
Blade spins or slips Blade is not tightly engaged with
the spindle.
Remove the blade and reassemble it as
described in Mounting and Removing the Blade
section.
Blade will not cut a straight
line.
Blade is dull.
Blade is not mounted properly.
Saw is not being guided properly.
Mount a new, sharp blade on the saw.
Check that blade is properly mounted.
Use a parallel guide.
Blade kicks back when
beginning a cut
Saw blade teeth may be engaged
in the material when starting.
Blade is not spinning fast enough
Before restarting a saw in the workpiece, center
the saw blade in the kerf and check that the saw
teeth are not engaged into the material.
Allow the saw blade to reach full speed prior to
beginning a cut in the material.
Positec Australia Pty Limited
10 Corporate Blvd Bayswater, VIC 3153, Australia