KRESS KUC35, Инструкция по безопасности и эксплуатации

Страница: 11 / 16

11
Lithium-Ion brushless hammer drill
KUC35 KUC35.9 KUC35.91
COMPONENT LIST
1. CHUCK
2. TORQUE ADJUSTMENT RING
3. TWO-SPEED GEAR CONTROL
4.
FORWARD/REVERSE ROTATION CON-
TROL
5. SOFT GRIP HANDLE
6. BATTERY PACK *
7. BELT HOOK
8. BATTERY CAPACITY INDICATOR
9. BATTERY PACK RELEASE BUTTON *
10. LED LIGHT
11. ON/OFF SWITCH
12. BIT CLIP
* Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
Type Designation KUC35 KUC35.9 KUC35.91
(C35 - designation of machinery, representative
of drill)
KUC35
KUC35.9
KUC35.91
Voltage 20V Max**
No load speed 0-550/0-2000 min
-1
Number of clutch
positions
20+1+1
Impact rate 0-10450/0-38000bpm
Max torque 140Nm
Chuck capacity 13mm
Max. drilling
capacity
Steel 16mm
Wood 152mm
Concrete 16mm
Brick 16mm
Machine weight 2.15kg 1.5kg
** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
ACCESSORIES
KUC35 KUC35.9 KUC35.91
Charger 1(KAC21) / /
Battery pack 2(KAB21) / /
Auxiliary
handle
1 1 1
Double ended
bits
1 1 1
Hook 1 1 1
Bit Clip 1 1 1
We recommend that you purchase your accessories
listed in the above list from the same store that sold you
the tool. Refer to the accessory packaging for further
details. Store personnel can assist you and offer advice.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
Assembly and Operation
ACTION FIGURE
ASSEMBLY
CHUCK ADJUSTMENT
Warning: Always lock off
trigger switch and disconnect
tool from power source when
changing accessories. Always ensure
the bit is secure before starting the
tool. Damage to the Chuck or a loose
bit may cause possible personal
injury.
Removing the bits See Fig. A1
Inserting the bits See Fig. A2
Assembling the belt hook and bit clip See Fig.
B1,B2,B3,B4
OPERATION
Forward/reverse rotation control
Warning: Never change the
direction of rotation when
the chuck is rotating, wait until
it has stopped!
See Fig. C1,
C2, C3
TWO-SPEED GEAR CONTROL See Fig. D