KRESS KU230, Руководство пользователя

Страница: 12 / 28

12
OPERATION GUIDELINES
Note: Please read the instructions carefully
before use.
USAGE
This tool is used to turn screws or drill holes in wood, metal
and plastics.
INSTALLATION AND OPERATION
STEPS PICTURES
BEFORE OPERATION
Disassemble battery pack See Figure A1
Battery pack charging See Figure A2
Installation of battery pack See Figure A3
INSTALLATION
CHUCK ADJUSTMENT
Warning: When replacing accessories, make sure that
the power supply is cut off and the switch is turned off
(the reversing lever is in the middle position). When starting the
tool, make sure that there is no hidden danger to the drill bit.
Damage or loosening of the chuck may cause personal injury.
Drill bit disassembly See Figure B1
Installation of drill bit See Figure B2
OPERATION
Forward and reverse switching
Warning: The direction of rotation
can not be changed until the machine
is completely stationary.
See Figures
C1, C2, C3
SPEED SHIFT See Figure D
TORSION ADJUSTMENT
Drill, screwdriver
See Figure E
Start/stop
WARNING: Do not use start-stop
switch for long time and low speed
operation, otherwise the machine may
overheat and cause tool damage.
See Figure F