Kremlin J 53 Скачать руководство пользователя страница 2

KREMLIN 

Page 1 

Manual : 573.156.112

 

 

 

 

INSTRUCTION MANUAL 

AIRSPRAY GUN - MODEL J 53 A & J 53 P

 

Dear Customer, you have just acquired an outstanding gun. For your entire satisfaction, special care has 
been taken by KREMLIN during all manufacturing processes for this spray gun. We suggest you first read 
carefully the following instruction manual before operating your gun. 

1.  EC DECLARATION OF CONFORMITY 

The manufacturer : 

KREMLIN  REXSON

 with assets of 6 720 000 Euros 

 

Head office : 150, avenue de Stalingrad   93 245 - STAINS CEDEX - FRANCE 

 

Tel. 33 (0)1 49 40 25 25  -  Fax : 33 (0)1 48 26  07 16 

Herewith declares that : Spray gun, is in conformity with :  
Maquinery Directive (Directive 98/37/EC) as amended and with national implementing legislation, 

ATEX Directive (Directive 94/9/EC) : 

 II 2 G (group II, class 2, class)  

Established in Stains, on March 1 st 2003, 

 

Daniel TRAGUS 
President 

2. GENERAL 

SAFETY 

INSTRUCTIONS 

WARNING : Any misuse of the equipment or accessories can damage them , result in serious 
body injury, fire or explosion hazard and reduce the equipment working life. Read, understand 
and comply with the safety instructions hereafter.

 

The personnel involved in operating and servicing the equipment must be aware of all safety 
requirements stated in this manual. The workshop supervisor must be certain that the personnel has 
perfectly understood the safety instructions and complies with them. 
Read all instruction manuals as well as the tags of the equipments before operating the equipment. 
Refer to local safety instructions and comply with them. 

„

 

INSTALLATION REQUIREMENTS 

Â

 Ground the equipments.  

Use the equipment only in a properly ventilated area to maximilize health care. Any misuse of the spray 
equipment or accessories can damage them and result in serious body injury, fire or explosion hazard. 
Do not smoke in the spray area. 
Never stoke paints and solvents in the spray area. Always close the pots and the tins. 
Always keep the spray area clean and free from debris (solvent, rags,…). 

 

Содержание J 53






Отзывы: