KREMLIN REXSON
- 1 -
N° : 578.027.120-UK-1309
1.
OPERATING PRINCIPLE
The pump consists of :
x
a central air motor (1),
x
two identical fluid chambers (2) located on either
side of the motor.
The motor is directly supplied with compressed air
from the air pressure network (maximum 6 bar / 87
PSI) or via an air regulator (depending on the
model). An air chamber is alternatively supplied by
an air distributor, thus causing the motion of the
diaphragms. Each of the two fluid chambers
includes a suction valve and an exhaust valve.
Alternatively material is siphoned and exhausted by
each chamber.
At the pump outlet, a fluid regulator with pilot (3)
provides a constant fluid pressure and flow rate.
The fluid pressure is equal to the pressure read on
the gauge (4).
The atomizing air pressure is adjusted by means of
the air regulator (5). The pressure is read on the
gauge (6).
2.
START-UP
Captions :
A - Pump
B - Air regulator (gun)
C - Air inlet
D - Fluid regulator with pilot
E - Air shut off valve
F - Suction rod
G - Drain hose
H - Drain valve
I - Air hose (static conductor)
(
7 or 8 mm / 1/4" or 5/16" depending on the
model of the gun)
J - Material hose (7 or 10 mm / 1/4" or 3/8" ID).
(For specific installation, please contact your
KREMLIN REXSON representative).
