© 2015 by Krell Industries, LLC
All rights reserved
Vanguard Family - Owner's Reference
www.krellonline.com
7
Remote Control Buttons
have the same function as the
front panel controls, when applicable.
u
Power
Use this button to switch the
Vanguard between stand-by and operational modes.
v
Mute Button
Use this to mute the Vanguard output. To un-mute,
press the mute button again.
w
Analog Input Buttons
(VIA and DVI)
Use these buttons to select analog inputs on the
Vanguard.
x
Digital Input Buttons (DVI, DAC)
Use these buttons to select digital inputs on the
Vanguard. Note: These buttons are only active when
the optional digital module is installed.
y
BAL (Balance) Buttons
(VIA,DVI)
Use these buttons to shift the balance to the left or the
right channel. Note: In menu mode, the balance but
-
tons are used for left and right navigation.
z
The Enter button
Use the enter button to confirm menu selections.
{
Volume Up/Down Buttons
Adjusts volume up and down on VIA, DVI and
D
AC
with a range of 0-100.
|
Menu Button
Use this to access the menu functions of the Vanguard
}
CD / DVD Transport Control
Not in use for Vanguard; used to control basic
CD / DVD functions on other Krell products.
Vanguard Integrated Amplifier / Digital Vanguard Integrated Amplifier
Vanguard Universal DAC
Figure 3 - Remote Control
Note
:
The remote comes with two AAA batteries
that have to be installed. Use the supplied Torx
Screwdriver to remove the 4 battery panel Torx
screws (T10) then install the batteries.
}
{
y
w
u
x
v
z
|
