2 Krell Resolution Subwoofer
Notes
Be careful not to scratch the
loudspeaker cabinet with the
grille locator pins.
Clean the grille periodically to
remove accumulated dust.
Gently wipe the grille from top to
bottom using a soft, dry, lint-free
cloth. Do not use rubber condi-
tioner or solvent.
Attach the grille to the loudspeaker
before you play music. The Resolution
Subwoofer has a snap-on grille, which
is comprised of grille cord strung
between 2 metal grille blocks. The
grille is shipped in the cardboard box
marked “grille”.
Follow These Steps to Attach the
Subwoofer Grille:
1. Grasp the grille blocks on each end
of the grille and lift the grille out of
the grille box.
Place the grille block with the Krell
logo on the bottom front of the sub-
woofer; and place the other grille
block on the top front.
2. Gently guide the grille locator pins
into the 3 grille holes on the bottom
front of the subwoofer.
3. Grasp the remaining grille block,
allowing it to rest between the
thumb and forefinger of each hand.
4. Pull firmly to stretch the grille cords,
until the grille locator pins align with
the 3 grille holes on the top front of
the subwoofer.
5. Gently guide the pins into the grille
holes. You hear a click when the
grille is in place.
Detach the Grille Before You
Repack the Subwoofer:
1. Grasp the grille block attached to
the top front of the subwoofer.
2. Gently pull the grille block straight
out until the grille locator pins slide
out of the grille holes.
3. Remove the grille block with the
Krell logo from the bottom front of
the subwoofer.
4. To protect the grille, place it in the
grille box until you are ready to rein-
stall it.
This product is manufactured in the United States of America. Krell
®
is a registered trademark of Krell Industries, Inc.,
and is restricted for use by Krell Industries, Inc., its subsidiaries, and authorized agents. All rights reserved. All other
trademarks and trade names are registered to their respective companies.
© 2004 by Krell Industries, Inc., All rights reserved
12. Locate the spikes, rubber feet and locking washers, in the small cardboard
box marked “accessories”.
13. Choose the set of feet you want to use on your subwoofer.
14. Thread the washers onto the feet.
15. Screw each foot/washer assembly into the 4 screw holes located on the bot-
tom of the subwoofer.
16. Carefully invert the subwoofer so that it is resting on the feet, right side up.
17. Spin the washers counterclockwise up the shaft of each foot to fix the height
of the foot.
18. Remove the top foam piece and protective sleeve. You are ready to position
the subwoofer in the listening area. 2 people needed
Each Resolution Subwoofer requires at least 2 inches (5 cm) of clearance on each
side and in front, and at least 2 inches (5 cm) of clearance above and to the rear
of the subwoofer for adequate ventilation. The subwoofer delivers excellent per-
formance in nearly any location in the listening room. Two placement options fol-
low:
Option 1: Stereo. Place the Resolution Subwoofer midway between the left and
right loudspeakers.
Option 2: Home Theater. Place the subwoofer in a corner of the room, preferably
one foot from any wall.
AC Power Guidelines. The subwoofer has superb regulation and does not
require a dedicated AC circuit. Operate the subwoofer only with the power cord
supplied.
Placement
To Install Feet On
Your Loudspeaker
Position the loudspeaker in the
listening area before attaching
the grille.
Each Resolution Subwoofer is
provided with 2 sets of feet: 4
spikes and 4 rubber feet. The
sharp, pointed spikes are ideal
for carpeted floors. The rubber
feet protect tile and wood floors.
Unpacking
, continued
To Attach/Detach the
Subwoofer Grille
(not illustrated)