31
Customizing the Phantom
The Phantom Preamplifier easy-to-use menu allows you to configure the following
functions. You can also use the menu to review version information about the soft-
ware, hardware, and firmware installed in the Phantom:
AC Mains,
page 32
Input Trigger,
page 37
Save,
page 42
Balance (channel)
page 33
IR Out Control,
page 38
Theater Mode,
page 43
Balance (input trim),
page 33
Link Control,
page 39
Volume Display,
page 44
Display,
page 34
Mute,
page 39
High Pass and Low Pass,
Info,
page 35
Output Trigger,
page 40
Page 44
Input Level Trim,
page 36
RC-5 Control,
page 41
Subwoofer Output,
Page 45
Input Name,
page 36
Recall,
page 41
Subwoofer Level Trim,
Page 45
Input Phase,
page 37
RS-232 Control,
page 42
Tape,
page 48
Navigation Conventions
Navigating the Phantom menu is straightforward and consistent throughout, using
four functions and the menu option
BACK.
5
Menu Button or Key
To enter the menu, press the menu button on the preamplifier front panel or the
menu key on the remote control. Once you are in the menu, you can press the
menu button or key to exit the menu.
14 Volume Knob or Level Keys
Use the volume knob on the preamplifier front panel or the up and down keys on
the remote control to scroll forward and backward through the menu hierarchy.
Each menu list is a continuous loop.
6
Enter Button or Key
Press the enter button on the preamplifier front panel or the enter key on the
remote control to select a function or a configuration option, and to confirm a
selection.
3
Front Panel Display
The display shows the active function and configurable options.
BACK
Select back to scroll backwards up the menu hierarchy, or to exit a menu option
without confirming it.
The first list you see in the menu is the list of configurable functions. Select a con-
figurable function to view a submenu: the list of options that configure the func-
tion. You can configure some options as well, using a second submenu.
SECTION
SEVEN
continued
