Krell Industries MASTER REFERENCE SUBWOOFER, Руководство пользователя для владельца

Страница: 39 / 58

continued
䊳
33
3.
Connect the cables from the left and right Krell CAST 4-pin inputs (14) on the
back panel to the left and right main preamplifier or processor outputs. For bal-
anced or single-ended operation, connect the interconnect cables from either the
left and right balanced (15) or the single-ended inputs (16) on the Master Reference
Subwoofer back panel to your left and right preamplifier or processor outputs.
4.
Connect the cable from the Krell CAST 4-pin LFE input (17) on the back panel
to the sub(woofer) output of your processor. For balanced or single-ended
operation, connect the interconnect cables from either the balanced LFE input
(18) or the single-ended LFE input (19) on the subwoofer back panel to the
sub(woofer) output of your processor.
5.
Connect the cables from the left and right Krell CAST 4-pin high-pass outputs
(20) on the back panel to the left and right CAST-equipped inputs of your power
amplifier. For balanced or single-ended operation, connect the interconnect
cables from either the left and right balanced high-pass outputs (21) or the left
and right single-ended high-pass outputs (22) on the back panel to the left
and right balanced or single-ended inputs of your power amplifier.
Notes
The Master Reference Subwoofer allows the connection of two independent preamplifier/source
components to the CAST and either the balanced or the single-ended inputs. For example, you
may want to connect two discrete front-end systems: Use the CAST input as the connection
to a dedicated two-channel system in which the KPS 25sc Krell Playback System is the CAST
source. Use the balanced input as the connection to a home theater system.
You cannot connect the balanced input and the single-ended input at the same time.
6.
If you have more than one subwoofer, connect the cables from the left and
right Krell CAST 4-pin by-pass outputs (23) on the back panel to the left and
right CAST-equipped inputs on another subwoofer. For balanced or single-
ended operation, connect the interconnect cables from either the left and
right balanced by-pass outputs (24) or the left and right single-ended by-pass
outputs (25) on the back panel to the left and right balanced or single-ended
inputs of another subwoofer.
See Unit ID Menu , on page 48, for information on assigning ID numbers for
controlling multiple subwoofers in a system.