Back Panel Description
See Figure 2 on page 8
Krell KAV–280p
9
The KAV–280p back panel provides connections for all inputs and
outputs, power on/off, and additional remote connections.
12 Left and Right Balanced Analog Inputs
The KAV–280p is equipped with one pair of balanced (B-1) inputs
via XLR connectors.
13 Left and Right Single-ended Analog Inputs
The KAV–280p is equipped with three pairs of single-ended (S-1,
S-2, or S-3) inputs via RCA connectors.
14 Left and Right Tape Inputs
The KAV–280p is equipped with a pair of single-ended tape inputs
via RCA connectors.
15 Left and Right Tape Outputs
The KAV–280p is equipped with a pair of single-ended tape
outputs via RCA connectors.
16 Left and Right Single-ended Outputs
The KAV–280p is equipped with a pair of single-ended preamplifier
outputs.
17 Left and Right Balanced Outputs
The KAV–280p is equipped with a pair of balanced preamplifier
outputs.
17 12 VDC Out
The KAV–280p is equipped with an output that sends 12 VDC
(12 V trigger) power on/off signals to other Krell components and
other devices that incorporate a 12 V trigger. This allows you to
turn other components on or off, or to and from stand-by, from the
KAV–280p. When the KAV–280p is switched between stand-by
and operate, it sends a signal from the 12 VDC Out that will switch
other components, allowing whole systems or parts of systems to
be easily coordinated.
ANALOG INPUTS
ANALOG OUTPUTS
BACK PANEL REMOTE
CONNECTIONS
Back Panel
Functions
