Krell Industries Home Theater Standard 7.1 Скачать руководство пользователя страница 75 | Manualshive

Страница: 75 / 86

background image

Operating the Home Theater Standard 7.1

Krell Home Theater Standard 7.1

71

After the Home Theater Standard 7.1 is connected to sources and
amplifiers, and the system is configured, the Home Theater Standard
7.1 is ready for operation.

1. Insert the AC power cord into the IEC connector (56) on the

Home Theater Standard 7.1. Insert the other end into the AC wall
receptacle.

2. Move the back panel power switch (55) into the up (on) position.

3. The red stand-by LED on the front panel illuminates. The words

PLEASE WAIT, INITIALIZING

appear in the front panel display (25), fol-

lowed by the model name, software version, and the AC line fre-
quency. After 5 seconds the initializing message disappears, and
the front panel display becomes blank. The Home Theater
Standard 7.1 is ready to be powered on.

After five seconds of inactivity, the display becomes blank.

4. Use either the front panel power button (1) or the remote control

power pre key (58) to power on the Home Theater Standard 7.1.
The blue power LED (2) on the front panel illuminates. The Home
Theater Standard 7.1 is now in the operational mode.

5. To return to stand-by, press the front panel power button or

power pre key again.

Krell recommends that the back panel power switch remain up (on) at all
times

.

The Home Theater Standard 7.1 has a discrete tape input and out-
put. The tape output is used to send an input signal from any analog
input (S-1 through S-7, B-1, or VCR1) to a recording source or
processor. You can use the tape feature in three ways:

1. Use the tape input to playback pre-recorded tapes.

2. Use the tape input to compare the output signal of a three-head

analog tape recorder to the output signal of an audio source.
Press the tape button (14) or key (70) to switch between the tape
recorder output (LED illuminated) and the input source (LED not
illuminated).

Press and hold a device key for three seconds, after the device
has been selected, to change the tape output source bus to the
currently selected zone. Tape out can come from the main zone
or zone 2.

ON/OFF/STAND-BY

TAPE INPUT
AND OUTPUT

Note

«
...
73
74
75
76
77
...
»

Содержание Home Theater Standard 7.1























































































Отзывы:

Нет отзывов

Похожие инструкции для Home Theater Standard 7.1

Бренд: rabbitone Страницы: 2

Бренд: Yamaha Страницы: 16

Бренд: Yamaha Страницы: 16

Бренд: Yamaha Страницы: 8

THR30II Wireless

Бренд: Yamaha Страницы: 2

Бренд: Yamaha Страницы: 150

Бренд: Yamaha Страницы: 16

Бренд: DR. Z Amplification Страницы: 6

Бренд: AR Страницы: 62

Бренд: Sansui Страницы: 24

Бренд: QSC Страницы: 80

Бренд: QUAD Страницы: 16

Бренд: Velleman-Kit Страницы: 24

Acoustic Box II

Бренд: Vintage Revolution Страницы: 17

Бренд: Randall Страницы: 6

Phat Tuesday MGA11000H

Бренд: Bazooka Страницы: 60

Бренд: Earthworks Страницы: 2

Phase Linear UPA224

Бренд: Audiovox Страницы: 29

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды