Krell Industries Home Theater Standard 7.1 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 86

background image

Krell Home Theater Standard 7.1

15

42 7.1 Audio Inputs
The Home Theater Standard 7.1 is equipped with eight single-ended
7.1 inputs for multichannel SACD and DVD audio devices. These
inputs currently act as analog pass-through inputs, with no mode pro-
cessing capabilities.

43 Optical Digital Audio Inputs
The Home Theater Standard 7.1 is equipped with two optical digital
EIAJ inputs with TosLink connectors.

44 Coaxial Digital Audio Inputs
The Home Theater Standard 7.1 is equipped with six coaxial digital
audio inputs with RCA connectors.

45 Digital Audio Outputs
The Home Theater Standard 7.1 is equipped with two digital audio
outputs: one coaxial with an RCA connector, and one EIAJ optical
with a TosLink connector.

46 S-video Outputs
The Home Theater Standard 7.1 is equipped with two S-video out-
puts with DIN connectors. The main S-video output (labeled OSD on
back panel) includes on-screen display. For dubbing purposes, the
second S-video output does not include on-screen display.

47 S-video Inputs
The Home Theater Standard 7.1 is equipped with four S-video inputs
with DIN connectors.

48 Composite Video Outputs
The Home Theater Standard 7.1 is equipped with two composite
video outputs with RCA connectors. The main composite video out-
put (labeled OSD on back panel) includes on-screen display. For
dubbing purposes, the second composite video output does not
include on-screen display.

49 Composite Video Inputs
The Home Theater Standard 7.1 is equipped with four RCA compos-
ite video inputs with RCA connectors.

50 Component Video Outputs
The Home Theater Standard 7.1 is equipped with one set of compo-
nent video outputs with RCA connectors. Component video uses
three wires, labeled Y, Cr, and Cb on the back panel, to convey the
video signal. These inputs are compatible with all wideband video
sources. See Configure Devices, on page 40.

Back Panel Description,

continued

Video Inputs
and Outputs

Analog Audio Outputs
and Inputs,

continued

Digital Audio Inputs
and Outputs

«
...
17
18
19
20
21
...
»

Содержание Home Theater Standard 7.1























































































Отзывы:

Нет отзывов

Похожие инструкции для Home Theater Standard 7.1

Бренд: JBL Страницы: 20

Бренд: Sansui Страницы: 16

Бренд: Parasound Страницы: 16

Бренд: VAC Страницы: 10

Бренд: Pangea Страницы: 7

Бренд: Ramsey Electronics Страницы: 44

Mobitronic ECL-100

Бренд: Waeco Страницы: 80

Бренд: Bazooka Страницы: 6

Бренд: Rajani Страницы: 10

Бренд: Roswell Страницы: 20

Бренд: Link electronics Страницы: 2

Ironheat IRT30-112

Бренд: Laney Страницы: 16

Бренд: Balanced Audio Technology Страницы: 14

Бренд: Cyfre Страницы: 2

Бренд: Redback Страницы: 4

Бренд: thomann Страницы: 36

Fiber Optics Fox 4G DA8

Бренд: Extron electronics Страницы: 22

Direct-A-Com Series 3 470

Бренд: NuTone Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды