26
Krell FBI
Q.
Should I leave my FBI on at all times?
A.
Krell recommends leaving the amplifier in the stand-by mode,
ready to play music. If you are not going to play music for a
long time, you may disconnect the amplifier from AC power
supply.
Q.
When I turn on the amplifier there is a loud hum through the
loudspeakers. What should I do?
A.
When a new component is introduced into a system, a low
frequency hum may occur in one or both loudspeakers. Check
all input and output connections, making sure they are of
sound construction. See How to Troubleshoot System
Noise
, on page 25. If the interconnects and cables are sound,
you may be experiencing a ground loop. This can often be
easily eliminated. Please contact your authorized Krell dealer,
distributor, or Krell for suggestions on how to solve this
problem.
Q.
When I use the FBI’s Theater Throughput capability with my
surround sound processor, where should I set the
volume on the FBI?
A.
You do not need to set the volume on the FBI because the
amplifier’s volume and balance controls are not active in the
Theater Throughput mode. When using the FBI’s Theater
Throughput capability, the surround sound processor controls
the system volume. See Optional Configurations, on page
23.
Questions and Answers
