Krell Industries Evolution 202 Скачать руководство пользователя страница 41

Страница: 41 / 48

Theater Mode

This function enables you to select theater mode volume for a particular input.

Use this function when connecting the output of a preamp/processor to the

Evolution 202 for home theater applications. Configuring an input for theater mode

sets that input for unity gain and suspends the level control of the Evolution 202.

Volume adjustments are then made through the preamp/processor connected to

the input configured for theater mode on the Evolution 202. The options are:

ON,

OFF.

Enter the menu, then:

Use the level control knob on the preamplifier front panel or the up and down

keys (14) on the remote control to select

THEATER.

Press the enter button on the preamplifier front panel or the enter key (6) on

the remote control

The front panel display (3) shows the default input:

B-1

Use the level control knob or the up and down keys to select the desired input:

B-1, B-2, S-1, S-2, S-3, C-1, C-2,

TAPE.

Press the enter button or key. The front panel display shows the default mode:

OFF

Use the level control knob or the up or down keys to select

OFF.

Press the enter button or key to confirm the selection and return to the select-

ed input.

The selected input is set to

THEATER

and the volume control for the theater input is

disengaged on the Evolution 202.

OFF

The selected input is configured normally and the volume control for the normal

input is engaged on the Evolution 202.

Note

Only one input on the Evolution 202 can be in theater mode at a time. When theater mode

is set for an input, theater mode is cleared automatically from other inputs.

The Evolution 202 selects the theater input automatically upon power on, if the input trigger

is configured for

THEATER

. See

Input Trigger,

on pages 35-36.

continued

Содержание Evolution 202

















































Результаты поиска

Содержание Evolution 202

Отзывы:

Похожие инструкции для Evolution 202

Бренды по названию

Популярные бренды

Krell Industries Evolution 202, Руководство пользователя для владельца

Результаты поиска

Содержание Evolution 202

Отзывы:

Похожие инструкции для Evolution 202

Бренды по названию

Популярные бренды