Kreg Pro DK5100 Скачать руководство пользователя страница 3

Страница: 3 / 24

GENERAL SAFETY INSTRUCTIONS

GUIDELINES FOR EXTENSION CORD USE

Extension cords are only to be used for temporary purposes.

They do not replace the need for installation of outlets and

proper wiring where necessary.

In the shop and on construction sites:

1. Extension cords with an equipment

grounding conductor must be used at all times.

2. Extension cords must be protected from damage,

and not run through doorways or windows where the

doors or windows may close, causing damage to the cord.

3. Extension cords should be a minimum of 16 AWG

and be rated for the equipment in use.

4. Extension cords must be periodically inspected

to ensure that the insulation and conductivity of the

wires are not compromised.

5. Extension cords should not be run through water or allowed to

have connections that may be exposed to accumulated water

TABLE 1

Nameplate

Amperes

@120 V

Extension Cord Length

25'

50'

75'

100'

150'

200'

Recommended Wire Gauge

0 -5

5.1 - 8

8.1 -12

12.1 - 16

NR – Not Recommended

WARNING:

This product can expose you to chemicals including lead, which is

known to the State of California to cause cancer, birth defects or reproductive harm.

For more information go to www.P65Warnings.ca.gov.

WARNING:

Drilling, sawing, sanding or machining wood products can expose

you to wood dust, a substance known to the State of California to cause cancer.

Avoid inhaling wood dust or use a dust mask or other safeguards for personal

protection. For more information go to www.P65Warnings.ca.gov/wood.

WARRANTY

DK SERIES FULLY AUTOMATIC POCKET HOLE MACHINES
Do not return the machine to the dealer for warranty service.

For all warranty issues, contact Kreg Tool Company Customer

Service at the address or phone number below.
Kreg Tool Company warrants to authorized distributors of

Kreg products and original purchasers from such distributors,

the DK5100 pocket-hole machine to be free from defects in

materials and workmanship for a five-year period from the date

of delivery to the original purchaser. The motors and other

working parts of the machine carry a one (1) year warranty

from the date of delivery to the original purchaser. The drill

guides carry a lifetime warranty. Kreg, at its option, will repair

or replace any product or component part thereof proving

defective during the warranty period.

This warranty only applies to products used in accordance with

all instructions set forth in catalogs and manuals furnished by

Kreg Tool Company as to operation, maintenance and safety.
This warranty does not apply to (1) items normally consumed

or requiring replacement due to normal wear (drill bits, lubricants,

etc.); (2) the cost of removal of components if such removal is

authorized by Kreg Tool Company; (3) shipment to Kreg Tool

Company’s repair facility; or (4) reinstallation of components.

This warranty becomes effective only when the accompanying

card or online form (available at www.kregtool.com) is fully and

properly completed and returned to Kreg Tool Company within

ten (10) days from date of delivery to the original purchaser.
This warranty is null and void if the product has been subjected

to (1) misuse, abuse, or improper service or storage; (2) accident,

neglect, damage, or other circumstances beyond Kreg Tool

Company control; and (3) modifications, disassembly, tampering,

alterations, or repairs outside of the Kreg Tool Company factory not

authorized by Kreg Tool Company. This warranty does not apply

to (1) any product not bearing the original serial-number plate; (2)

non-original purchasers; and (3) normal wear and tear, corrosion,

abrasion, or repairs required due to natural causes or acts of God.

To obtain warranty service, contact the distributor from whom

the pocket-hole machine was purchased or contact Kreg Tool

Company directly. Proof of purchase is required for remedy

under the terms of this warranty. Kreg Tool Company assumes

no responsibility for products returned without prior authorization.

Kreg Tool Company obligations under this warranty shall be

exclusively limited to repairing or replacing (at Kreg Tool Company

option) products determined by Kreg Tool Company to be defective

upon delivery to the Kreg Tool Company factory and inspection by

Kreg Tool Company technicians. Under no circumstance shall Kreg

Tool Company be liable for incidental or consequential damages

resulting from defective products, nor shall Kreg Tool Company

liability exceed the purchase price paid by the original purchaser.
This is the Kreg Tool Company sole warranty. Any and all

other warranties implied by law, including any warranties for

merchantability or fitness for a particular purpose, are hereby

limited to the duration of this warranty. Kreg Tool Company shall

not be liable for any loss, damage, or expense directly or indirectly

related to the use of its products or from any other cause or for

consequential damages including without limitation, loss of time,

inconvenience, and loss of production. The warranty contained

herein may not be modified and no other warranty, expressed or

implied, shall be made by or on behalf of Kreg Tool Company.
Register your warranty within ten (10) days of date of delivery.

Warranty service will not be provided without registration.
Keep a copy of this form for your records.
For your records the following information will be useful in the

event warranty service is required. For a complete record,

attach a copy of the purchase invoice to this form.

Date of Purchase: ___/___/_____
Purchased From: __________________________________
Serial Number: ____________________________________
(serial number located on front edge of work surface plate)