rX-Tank is only cleaning one end or restricted in its coverage
•
Check that the hose is not coiled or kinked.
To uncoil the hose:
•
Simply rotate every second 1m hose length 180 degrees until
it is straight again.
•
In hot weather (above 28ºC), remove the cleaner and hose
from the pool and lay the hose only flat for a day. The heat
will make the hose relax and uncoil.
•
In cooler weather, remove the hose from the pool. Prop
both ends of the hose around 20cm off the ground. Pour a
bucket of warm water (50-60ºC) into the hose until it spills
out of the other end. Carefully roll the hose side to side to
ensure even warming. After 5 minutes, fill the hose with
cold water – either with a bucket or by placing the hose end
onto the pool outlet.
•
Check that the return line water flow is directed downwards or
sideways. Redirect it as necessary with a return line diverter. If that
still doesn’t work, you my need to purchase an Eyeball Diverter
from your local Kreepy Krauly retailer.
•
Check that the hose weight is fitted as described on page 6.
NOTE:
For more detailed troubleshooting advice, please
contact your helpful local dealer, or check our online resources for
hints, tips and other information at www.kreepykrauly.com.au
or visit our YouTube channel under Kreepy Krauly Troubleshooting
www.youtube.com
11
rX-Tank_manual_V12.indd 11
14/10/19 1:20 pm
