KRAUSMANN U98020-00B, Руководство по эксплуатации, Страница: 22 / 24

22
U98020-00B KRAUSMANN POWER TOOLS
Damage due to overloading.
Usage of incorrect or incompatible accessory.
B ad maintenance from the operator or any
other third party.
W ear that was induced by external factors or
rogue particles (dust, debris etc.)
W ear due to non compliance with the instruc-
tions in this manual.
I f, during the warranty period, there is a fault that
can not be repaired from the authorised service
department, the tool will be replaced without any
extra cost.
In case there is a need for a repair after the war-
ranty period has expired, we will provide the best
possible attention to repair the tool successfully.
7. Repair / Servicing
Do not dispose of electrical
machines as unsorted municipal
waste, use separate collection
facilities.
Contact your local government
collection systems for informa-
8. Disposal
tion regarding the collection systems available.
I f electrical machines are disposed of in landfills
or dumps, hazardous substances can leak into
the groundwater and get into the food chain,
damaging your health and well-being. When
replacing old machines with new ones, the retailer
will be happy to take back your old machine for
disposal.
9. Declaration of Conformity
Herewith declares that: The Brushless Cordless
Hammer with CODE: U98020-00B and distinctive
title: RH10BL-1200 under the brand KRAUS -
MANN
(Description: Brushless Cordless Hammer, 20V,
230V-50Hz, no-load speed: 0-1400rpm, impact energy:
2.2J, max drilling diameter: in concrete: 22mm, in steel:
13mm, in wood: 28mm, brushless motor, SDS-Quick
PAPADEAS S.A.
4-6 Iroon 1912 St., 13671, Acharne, Greece
Authorized Representative
English | EN
The tool has been used properly and for the
purpose for which it was purchased.
T he tool presents a problem that is due to
faulty material and manufacturing.
I ncapability of the tool to perform according
to the technical specs provided.
Damages are not covered by the warranty that are
due to causes such as:
W ear due to improper use.
Partial or total disassembly.The tool’s shell
must be disassembled only by personnel
authorised by the official distributor.
Terms of warranty
The warranty is valid only when:
This tool has been checked by the manufacturer.
From the date of purchase by the final consumer,
a two year warranty for amateur use covers any
faulty material and manufacturing. The receipt or
invoice of purchase needs to be displayed in case
of a repair that is covered by the warranty. For
possible faults during the warranty period, you
should address your issue to the retail shop from
which the purchase was made.
6. Warranty
Wear ear defenders
Wear safety goggles
Wear a dust mask
Hammer drilling
Adjusting chiselling position
Chiselling
Drilling