KRAUSMANN U36020-00, Руководство по эксплуатации

Страница: 8 / 24

8
U36020-00 KRAUSMANN POWER TOOLS
When you finish cutting in one location and
wish to continue in another location, turn
the tool off, lift the unit up and carry it pay -
ing attention to the cutting attachments.
When transporting or storing the machine,
always fit the cutting device guard or
guide bar cover.
W
hen hand-carrying the product, cover the
cutting part if necessary, lift the product
up and then carry, paying attention to the
cutting attachment.
W
hen transporting by car, fix the unit firmly
using a rope. Do not transport by bicycle or
motorcycle because it is dangerous.
Transportation
WARNING:
If the replacement of any part is necessary, this
has to be done by a professional in order to avoid a
safety hazard.
SAVE THESE INSTRUCTIONS
WARNING:
M isuse or failure to follow the safety rules stated in this
instruction manual may cause serious personal injury.
4. Functional description
and specifications
Intended use
This tool has been designed for use in cutting
bushes and trimming hedges. It should never be
used for any other purpose.
Insert the plug on the charging unit into
Place the battery pack and charger on a flat
non-flammable surface and away from flammable
material when re-charging the battery pack.
Charging the battery
WARNING:
When battery charge runs out after continuous use or
exposure to direct sunlight or heat, allow time for the tool
to cool down before re-charging to achieve the full charge.
tent servicing dealer.
U
nder no circumstances should you take
the machinery apart or alter it in any way.
Doing so might result in the product becom-
ing damaged during operation or the prod-
uct becoming unable to operate properly.
a power socket and turn the power on if
required.
Insert the bat tery with the charging output
interface to the charging port. The charging
time depends on the capacity of the battery
and the type of the charger.
The process of charging battery pack is red,
yellow and green light in turn. When the red
light stays lit, the battery pack has less power.
When red and yellow lights stays lit, the bat-
tery pack has more than half of power. When
red, yellow and green light is on, the battery
pack is fully charged.
WARNING:
Do not use the product without attaching the guard
and front handle.
Assembly
Tighten the screw in the right of the front handle 4
after adjusting the front handle into place. Do not
use the product before the handle is assembled
correctly (fig 1).
Installing and removing the battery
pack.
Always switch off the tool before insertion or
removal of the battery pack. To remove the battery
pack, withdraw it from the tool while pressing the
release button. To insert the battery pack, align the
tongue on the battery pack with the groove in the
housing and slip it into place. Always insert it all the
way until it locks in place with a little click. If not,
it may accidentally fall off the tool, causing injury
to you or someone around you. Do not use force
No-load speed
Blade length
Working length (net)
Cutting capacity
Weight
Tool U36020-00
Assembling the Front Handle
1300 spm
510 mm
450 mm
16 mm
2.07 kg
English | EN