19
KRAUSMANN POWER TOOLS
9197
department, the tool will be replaced without any
extra cost.
The tool has been used properly and for the
purpose for which it was purchased.
T
he tool presents a problem that is due to
faulty material and manufacturing.
I
ncapability of the tool to perform according
to the technical specs provided.
Damages are not covered by the warranty that are
due to causes such as:
Wear due to improper use.
Partial or total disassembly.The tool’s shell
must be disassembled only by personnel
authorised by the official distributor.
Damage due to overloading.
Usage of incorrect or incompatible accessory.
B
ad maintenance from the operator or any
other third party.
Wear that was induced by external factors or
rogue particles (dust, debris etc.)
Wear due to non compliance with the instruc-
tions in this manual.
I
f, during the warranty period, there is a fault that
can not be repaired from the authorised service
English |
EN
Wear ear defenders
Wear safety goggles
Wear a dust mask
This tool has been checked by the manufacturer.
From the date of purchase by the final consumer,
a two year warranty for
amateur use
covers any
faulty material and manufacturing. The receipt or
invoice of purchase needs to be displayed in case
of a repair that is covered by the warranty. For pos-
sible faults during the warranty period, you should
address your issue to the retail shop from which
the purchase was made.
6. Warranty
Terms of warranty
The warranty is valid only when:
In case there is a need for a repair after the war-
ranty period has expired, we will provide the best
possible attention to repair the tool successfully.
7. Repair / Servicing
collection systems for information regarding the
collection systems available.
I
f electrical machines are disposed of in landfills
or dumps, hazardous substances can leak into
the groundwater and get into the food chain,
damaging your health and well-being. When
replacing old machines with new ones, the retailer
will be happy to take back your old machine for
disposal.
Do not dispose of electrical
machines as unsorted municipal
waste, use separate collection
facilities.
Contact your local government
8. Disposal
9. Declaration of Conformity
Herewith declares that: The
Multi Oscillating tool
with
CODE: 9197
and distinctive title:
TD9525K
under the brand
KRAUSMANN
(Description: Multi
purpose tool 400w, 230v-50Hz, no load speed: 15000-
22000 min
-1
, quick release disc, with 1pc sanding plate, 1pc
plunge cut blade, 1pc scrape blade, 2pc 80# sandpaper,
one pair of carbon brush, cable: 2m, in color box packing),
is designed in conformity with provisions of the
Directive 2006/42/EC and the following manufac-
turing standards: EN62841-1:2015, EN62841-2-
4:2014, AfPS GS 2019:01 PAK.
Y
ear in which “CE” marking was affixed: Machine-
year 2019
Date: October 29th, 2019
PAPADEAS S.A.
4
-6 Iroon 1912 St., 13671, Acharne, Greece
Authorized Representative
* Accessories and contents may change from the production
factory without any warnings, in that case the company bears
no responsibility.
geprüfte
Sicherheit
