10
6mm
(1/4") dia.
Step 8: Installing the battery pack
Drill a hole in the wall using a 6mm (1/4 in.)
diamater drill bit. Install the battery pack (K1)
using the molly anchor (K3) and screw (K2)
provided. Insert the battery pack cable (1) into
the control box connection (2).
Step 9: Connect waterlines to main valve
Before connecting waterlines to main
valve, attach brass check valves (J) to angle
stops (not included), then connect waterlines
to brass check valves (J) and tighten until
snug. Turn on angles stops and check for
leaks (DO NOT TURN FAUCET ON)
2
1
K3
K2
K1
NOTE: After installing the battery pack,
the light on the sensor will flash and the
faucet will sound when you move your
hand in the sensor area. If not, check to
ensure the batteries are installed
correctly.
J
NOTE
: Please make sure filter washers
are installed before connecting to
the main valve
.
