a. Drain Body
b.Thin Gasket
c. Concave Gasket
d. Plastic Washer
e. Nut
f. Gasket
g. Tailpipe
h. Nut
DIMENSIONS
PU-11 DIAGRAM AND PARTS LISTS
STEP 1
Remove connector (h), tail pipe (g), mounting
nut (e), plastic washer (d), and concave washer
(c) from drain body (a)
STEP 2
Install drain body (a), with rubber washer
(b) attached, into the drain hole. From
underneath, attach concave washer (c) (narrow
end up), plastic washer (d), and mounting nut
(e) to drain body (a)
STEP 3
Tighten mounting nut (e) with adjustable
wrench until snug. Thread connector (h), with
tailpipe (g) attached, onto drain body (a) and
hand-tighten
Installer Tip:
Make sure tailpipe washer (f)
is installed in tailpipe
STEP 4
g
REPLACEMENT PART LIST
CARE & MAINTENANCE
* To keep the product clean & shining, follow
the steps below:
1. Rinse with clean water & dry with a soft cloth
2. Do not clean with soaps, acid, polish,
abrasives, or harsh cleaners
3. Do not use cloth with a coarse surface
* This installation manual is subject to change without notice
1. Drain Cap
2. Gasket
3. Drain Body
4. Thin Gasket
5. Concave Gasket
6. Plastic Washer
7. Nut
8. Gasket
9. Tailpiece
10. Nut
Connect tailpipe (g) to p-trap
a
b
c
d
e
f
g
h
a
b
c
d
e
f
g
h
a
b
c
d
e
e
f
g
h
