22
Manual
www.kraun.com
3.9. dI/do settings
The video server product provides DI/DO alarm function, a video motion detection or the digital input
signal could trigger the digital output alarm. The duration of the alarm could also be set. The related
settings are explained below:
1. Digital input – can select the normal status of the digital input as either open circuit or closed circuit.
The current status is also displayed.
2. Digital output – can select the normal status of the digital output as either open circuit or closed
circuit. The current status is also displayed.
3. D/O alarm – select the trigger mode of the digital out alarm
A. Motion trigger – if this is selected, the digital output alarm signal will be active when video
motion is detected. The detection sensitivity is set In the “motion detection” page.
B.
D/I trigger – if this is selected, the digital output alarm signal will be active when the digital
input signal is detected..
C. Schedule – if this is selected, the digital output alarm is scheduled according to the settings of
scheduling in section 3.11.
D. Active – force the digital output to be active.
E.
Normal–force the digital output to be normal.
4. D/O Alarm duration – this is the digital output alarm duration for each trigger.
Figure 3-14: DI/DO Settings page
