36
Manual
www.kraun.com
9. does the IP Cam provide the recording function?
A:
You can do the recording of the video/audio of the IP Cam from the KraunView software with the
KraunView software. You can also do the video/audio recording to the standard NAS storage device.
Another software CamPlay is needed to playback the recorded vide/audio files.
10. The video seems a little dark when the IP Cam is used inside the house, how could I improve
this?
A:
You can increase the “Low light sensitivity” in the “video settings” page either through web
configuration or through KraunView settings to “High” or “Very high”. This will tremendously improve
the video quality in dark environment. Another model of our IP Cam products IC212w with IR led
inside could help on some of the very tough environment even in wholly darkness. But please be
noticed that when the IR led is turned on in the dark room, the video will be black and white only.
11. Can I connect the IP camera directly to my PC/notebook with an ethernet cable?
A:
If the IP camera is directly connected to your PC/notebook computer using an Ethernet cable, the IP
camera will automatically use an IP address called “auto IP” with IP address 169.254.xxx.xxx. If your
PC/notebook computer is configured to DHCP, it will also use an “auto IP” address. But this will take
about one minute after the IP camera is connected to the computer and you need to make sure that
the WiFi interface on your PC/notebook computer is disabled. After about one minute, you can run
the KraunView software to access the IP camera, the CAM ID should be displayed on the “auto-search”
list. You can then see the video by double clicking the CAM ID icon. But you need to know that in this
situation, other local or remote computer can not see the video.
