15
Manual
www.kraun.com
All the fields in this page must be filled correctly with the same settings the wireless router or AP using.
Figure 3-8: WiFi security enabled page
You can also click the “WiFi test” button to check if the IP Camera can connect to the wireless network for
these settings. You will need to unplug the Ethernet cable to enable the wireless connection after the “WiFi
test” is successful.
You can click the “WiFi scan” button to scan for all the available access points nearby.
If you want to define fixed IP address when using WiFi connection, please press the “IP address” button and
key in your preferred IP address.
After the setting and “Save&Apply”, do not need to restart the IP Camera to let the WiFi work, only need to
unplug the Ethernet cable.
The default setting is “Disable WiFi Function”.
Figure 3-9: WiFi testing page
