36
the network is aborted?
A:
The energy saving settings of the computer or the NAS interrupt the
connection.
If the energy saving settings of your computer or your NAS are active, then
they can go into an idle state or a sleep mode even though they are being
accessed via the network. During a sleep mode no data is transferred via the
network. Please adjust the energy saving settings of the media source so that
it does not go into a sleep mode while you play files via the network.
Q:Why is it possible that there are interruptions when playing movies
from my local network?
A:
Sometimes, there are several devices in a network that have to share the
maximum data transfer rate possible via a network connection (shared
medium). If there are several connections active in the network you use the
Player in (e.g. to the internet, a shared printer, etc.), it is possible that this
lowers the data transfer rate available for the streaming of the data to the
Player to a level that is insufficient for the playback of e.g. a DVD file or
an HD movie file. Should you experience such problems, please try to reduce
the amount of data transferred by other users of your network.
Q: While using the Player, it no longer responds to my commands.
A:
This problem may have several causes. Please check the following items:
1) Please aim the remote control in the direction of the Player so that direct
visual contact between these two devices exists and ensure that the infrared
receiver of the remote control and the Player are not covered.
2) Check the battery in the remote control and, if necessary, replace it with a
new one.
Q: I have connected the Player to my TV via HDMI and I want to change
the video output signal, but the video output resolution I want to use is
not available.
A:
This problem may have several causes. Please check the following items:
36
www.kraun.it
User Manual
