26
Wireless Setup
If it is the first time for you to use wireless network function, please do the
following setting:
Access your player to the Local Area Network (LAN), and press “Setting” in
the remote control to enter the player’s setting interface.
1. Select “Network” and enter "Wireless network setting", choose the file
name of the connecting configuration. Then the clue of “Press ‘OK’ in the
remote control to connect, and press ‘OK’ to test the selected connection”
will show on the lower part of the screen. Press “OK” to connect. There
are two connection modes to choose: "AP" and “Ad Hoc”.
2. If select “AP” mode, the player can detect wireless signal sources within
the searching scope of the configured wireless network card and the
interface will show all the detected wireless SSID.
3. If select “Ad Hoc” mode, the player can access to sharable content in
specific objects. For example, the product and computers can connect
and exchange data through choosing “Ad Hoc” mode without using
wireless Routers.
4. Connect the product’s antenna with a USB wireless network card, put
through the antenna, and then you can set the wireless network
according to the following steps. If no external antenna is configured to
the product, a USB wireless network card that supports 802.11 b/g/n
protocol will be needed to insert into the USB HOST interface of the
product. Then “WIFI PLUG IN” will show on the screen. Thus you can
start to set the product’s wireless network. The following is detailed
description for the operations of two wireless network connection modes:
Infranstructure(AP) setting
1. Select “AP” to get SSID names. You can choose automatic update and
the product will search all the wireless SSID within the searching scope
26
www.kraun.it
User Manual
