OM45T_
Rev N
Page 6
I.V Safety Terms Summary
The following safety terms may appear on the product:
Les termes de sécurité suivants peuvent apparaître sur le produit:
DANGER—
Indicates an immediately accessible injury hazard is present as you read the marking, and failure to take
precautions could result in loss of life
DANGER
—Cette indication signale un risque de blessure immédiat et qui peut être mortel.
WARNING—
Indicates a nearby injury hazard that is not immediately accessible as you read the markings, and failure to
take precautions could result in personal injury and/or loss of life
AVERTISSEMENT
—Cette indication signale un risque de blessure non immédiat mais qui peut être mortel.
CAUTION—
Indicates a potential hazard to property, including the product
PRUDENCE
—Indique un risque pour l’environ du produit, le produit inclus.
The following safety symbols and terms may be used in this manual:
Les symbols et les termes suivants de sûreté peuvant être employés en ce manuel:
WARNING! Statements identify conditions & practices that could result in injury or loss of life.
AVERTISSEMENT! Les rapports d’avertissement identifient les conditions ou les pratiques qui pourraient avoir comme
conséquence les dommages ou la perte de la vie.
RISK OF ELECTRIC SHOCK!
RISQUE DE DÉCHARGE ÉLECTRIQUE!
I.VI Summary of Safety Precautions
The following safety precautions are not related to any specific procedure, and so will not appear elsewhere in this manual.
Ensure all personnel understand & apply these precautions in all phases of installation, operation, & maintenance. Failure
to do so may result in loss of life.
KEEP AWAY FROM LIVE CIRCUITS:
Personnel must observe all applicable safety regulations at all times. Ensure
power is disconnected or removed from the unit BEFORE replacing any components. Potential hazards may exist even
though the power control switch is in OFF position. Capacitors retain electrical charges. Always REMOVE POWER & use
test equipment to confirm a circuit is at ground potential BEFORE touching it. NEVER reach into or enter an enclosure to
service or adjust the equipment until the absence of power has been confirmed.
DO NOT SERVICE OR ADJUST ALONE:
Under NO circumstances should ANY person reach into or enter the
enclosure for the purpose of servicing or adjusting the equipment
except in the presence of someone who is capable
of rendering aid
in case of an accident/emergency.
RESUSCITATION:
Personnel working with or near high voltage should be familiar with resuscitation methods (CPR
and/or AED). CPR info may be obtained from medical personnel. For AED (Automated External Defibrillator) information,
contact supervisor or hosting administration for details on the availability and/or location of an AED unit at your worksite.
ELECTROSTATIC DISCHARGE PRECAUTION
This equipment contains electrostatic discharge (ESD) sensitive devices. ESD sensitive equipment handling methods
must be used to prevent equipment damage during handling and servicing.
ESSENTIAL HEALTH AND SAFETY REQUIREMENT
Refer to document “P/N 240117—Essential Health and Safety Requirements”.
