Kratki koza k5, Руководство пользователя и гарантийный талон

Страница: 11 / 44

11
is supplied together with the defective equipment.
The warranty card is valid if:
- it has been properly completed and shows the purchase date, seal and signature;
- the purchase date shown in the warranty card is the same as that shown on the receipt or a copy of
the invoice.
Automatic Air Supply System (ASDP) – Systemthe bimetal based, self-regulating thermostat
automatically controls the supply of air to the hearth, and consequently controls the combustion
temperature inside the freestanding stove.
Before lighting the stove set the opening angle of the thermostat so as to ensure free air flow to the
hearth and open the air inlets in the door and on the stove front..
it is recommended to open the thermostat initially (through experimentation) at 60%; then you will
obtain an optimal combustion temperature for a 3,5 - 4kg large batch of wood. once the batch is lit
close the air inlets in the door and on the stove front. As the temperature in the fireplace is growing,
the thermostat starts to perform its function: while closing gradually, it reduces the amount of air in
the combustion chamber. when the optimal temperature of 300°c is reached, air supply is largely
reduced, resulting in the stove’s temperature falling down until the minimum temperature necessary
to maintain the fire is achieved. when the temperature drops below 250°c, air supply starts to be
automatically opened and combustions becomes more intense once again. to obtain a higher
combustion temperature, you should set a larger opening angle of the thermostat before lighting
the stove.
when the thermostat is in place, you can reduce the amount of wood needed to burn by 30% as
compared with the stove without an automatic combustion control system. in addition to wood
savings, this solution improves the comfort of the stove’s use; there is no need to keep checking and
adjusting air supply in the door and on the stove front to maintain proper combustion: the thermo-
stat will do this for you.
SPArE PArTS
if after many years some parts have to be replaced, please contact the vendor or any representative
of our company. when ordering spare parts, please name the details from the rating plate shown on
the reverse side of the warranty card, which should be retained even after the expiry of the warranty
period.
Having these details and our factory documentation, the vendor will be able to supply all spare parts
within a short time and proceed with repairs as part of their responsibilities. note: cracks that may
occur in vermiculite boards are natural for this type of material and do not affect its utility values.
note: Do not use any air exhaust equipment in the room where the stove is installed (as required by
Polish laws).
MANUFACTUrEr
KRAtKi.Pl declines all liability for damage caused by the user’s modifications of the unit and the
remaining piping system. to continually improve the quality of its products, KRAtKi.Pl reserves the
right to alter its equipment without prior notice.