background image

Description

Description

Description

Description

Description

40

5

With delayed motor cut-out

Frequent, work-necessitated switching on and off of motors on
machines of this size puts a heavy load on the power network
and causes increased wear on internal electrical parts. That’s
why the motor on the new KRÄNZLE switches itself off 30
seconds after the trigger is released, and switches itself back on again when the
trigger is pressed.

Safety cut-out

When running your high pressure cleaner with hot water of 80

°

 C raised tem-

peratures occur. 

Do not touch the machine without safety gloves!

CAUTION !

CAUTION !

Never use liquid containing solvents such as paint thinners, petrol, oil or similar
liquid matter.

 

Pay attention to the instructions of the manufactur-

ers of the cleaning agents.

 The seals in the machine are not resistant to

solvents. The spray of solvents is inflammable, explosive and poisonous.

Setting up

Location

Neither set up and operate the machine in rooms where there is a risk of fire or
explosion nor put it into puddles.  Do not use the machine under water.

If you forget to switch the machine off after use, or if the gun is not used for 20
minutes, the machine switches automatically to safety mode. It can be re-activated
by pressing the master switch.

Replacements and inspection work should only be performed by
qualified persons 

when the machine is disconnected from

the power supply, i.e. pull out the plug from the
electrical socket.

Notes

Notes

Notes

Notes

Notes

Содержание 2170TST























Отзывы: